Zapytanie o materiały, konsultację techniczną lub dobór rozwiązania? Skontaktuj się z nami.
GEOGABION






















Gabions and mattresses in double-twisted mesh are structures manufactured from steel wire mesh which, once filled with stone, form a stable, draining, and durable system. These solutions perform effectively under uneven settlement, hydrodynamic loading, and long-term service conditions.
Technical Characteristics:
● mesh type: double-twistedwire
● diameter for box gabions: 2.7–3.0 mm
● wire diameter for mattresses: 2.2–2.7 mm
● edge / reinforcing wire: 3.4–3.9 mm
● mesh opening size: 60×80 mm, 80×100 mm, 120×140 mm
● coating: zinc, Zn-Al, polymer over metallic coating
Gabion structures are used for bank protection, slope stabilization, channel lining, retaining walls, erosion control, and engineered landscape features. Mattresses are typically used for surface protection of soil or channel beds against scour. | Read more…
Welded gabions, meshes and fencing are systems based on welded metal panels or modules that provide accurate geometry, stiffness, and a clean structural appearance. These solutions may be supplied as panels, baskets, or sectional modules.
Technical Characteristics:
● system type: welded panels, baskets, sectional modules.
● wire diameter: 4,0–6,0 mm.
● mesh opening size: 50×50 mm, 50×100 mm, 100×100 mm.
● coating: zinc, Zn-Al, polymer.
● connection methods: spirals clips, lacing wire, steel connectors.
Welded systems are used in architectural, landscaping, infrastructure, and fencing applications. They are suitable for decorative and retaining structures, fencing, cladding, area zoning, and localized reinforcement.| Read more…
Welded gabions, meshes and fencing are systems based on welded metal panels or modules that provide accurate geometry, stiffness, and a clean structural appearance. These solutions may be supplied as panels, baskets, or sectional modules.
Technical Characteristics:
● system type: welded panels, baskets, sectional modules.
● wire diameter: 4,0–6,0 mm.
● mesh opening size: 50×50 mm, 50×100 mm, 100×100 mm.
● coating: zinc, Zn-Al, polymer.
● connection methods: spirals clips, lacing wire, steel connectors.
Welded systems are used in architectural, landscaping, infrastructure, and fencing applications. They are suitable for decorative and retaining structures, fencing, cladding, area zoning, and localized reinforcement.| Read more…
Ring mesh, hexagonal mesh and protection systems are materials used for slope stabilization, retention of unstable zones, and protective structures where static or dynamic load transfer is required.
Technical Characteristics:
● hexagonal mesh: wire 2.2–3.0 mm, opening 60×80 mm or 80×100 mm.
● ring mesh: wire 2.0–3.0 mm, ring 250–350 mm.
● ring mesh weave type: 4 in 1, 6 in 1.
● coating: zinc, Zn-Al, polymer.
● additional elements: anchors, edge ropes, steel ropes, plates, clips, fixing components.
These systems are used for active slope protection, rockfall protection, stabilization of road embankments and cuttings, stabilization of rocky sections, and other specialized engineering protection systems. | Read more…
Geocells are polymer cellular materials which, once expanded, form a three-dimensional structure used to confine infill and distribute loads.
Charakterystyka techniczna:
● material: HDPE.
● material density: 0,94 g/cm³.
● strip type: textured and perforated / non-perforated.
● cell height: 25, 50, 75, 100, 150, 200, 250, 300 mm.
● strip tensile strength: 13–30 kN/m.
● elongation at maximum load: 15 ± 8 %.
Geocells are used in road, infrastructure, and hydraulic engineering, for slope stabilization, yard and platform stabilization, embankments, technical zones, and transport infrastructure. | Read more…
Geocells are polymer cellular materials which, once expanded, form a three-dimensional structure used to confine infill and distribute loads.
Charakterystyka techniczna:
● material: HDPE.
● material density: 0,94 g/cm³.
● strip type: textured and perforated / non-perforated.
● cell height: 25, 50, 75, 100, 150, 200, 250, 300 mm.
● strip tensile strength: 13–30 kN/m.
● elongation at maximum load: 15 ± 8 %.
Geocells are used in road, infrastructure, and hydraulic engineering, for slope stabilization, yard and platform stabilization, embankments, technical zones, and transport infrastructure. | Read more…
Culverts and retention tanks are systems used for drainage, water retention, and hydraulic engineering solutions.
Technical Characteristics:
● diameter: 500–3500 mm.
● wall thickness: 2,0–6,0 mm.
● material: steel / polymer.
● coating: zinc, polymer, bitumen-polymer.
● connection type: bolted with sealing.
● execution: pipes, arches, tanks.
These systems are used in road construction, technical infrastructure, drainage systems, and for storage of stormwater, technical water, and firefighting water. Depending on the task, they may be pipes, arch structures, or tank modules.| Read more…
Ground screws are steel foundation elements with helical plates that are installed into the ground without wet processes.
Technical Characteristics
● material: S235 / S355
● shaft diameter: 57, 76, 89, 108, 140 mm
● wall thickness: 2,5–8,0 mm
● screw length: 550–8000 mm
● head type: flanged and other structural variants
● coating: hot-dip galvanizing
● upper structure: steel structure prepared for photovoltaic modules
● configuration: individual or modular solutions depending on the number of parking spaces and project layout
Ground screws are used for light and medium-loaded structures.| Read more…
Ground screws are steel foundation elements with helical plates that are installed into the ground without wet processes.
Technical Characteristics
● material: S235 / S355
● shaft diameter: 57, 76, 89, 108, 140 mm
● wall thickness: 2,5–8,0 mm
● screw length: 550–8000 mm
● head type: flanged and other structural variants
● coating: hot-dip galvanizing
● upper structure: steel structure prepared for photovoltaic modules
● configuration: individual or modular solutions depending on the number of parking spaces and project layout
Ground screws are used for light and medium-loaded structures.| Read more…
Parking grids are modular open-cell systems used for permeable surface construction, base stabilization, and load distribution.
Technical Characteristics:
● product type: modular parking / grass / road grid.
● module size: approximately 39 cm – 58 cm.
● element height: approximately 2.5–5.0 cm.
● fill type: soil with grass / aggregate / mineral fill.
● biologically active area: depending on the model, up to 88.6%.
● permeability: high.
● load capacity: depending on the system and base structure, up to 1000 t/m².
● installation: modular connection of elements.
Parking grids are used for parking spaces, driveways, pedestrian paths, bicycle zones, technical access roads, residential areas, and other surfaces where permeability and surface stability are important.| Read more…
Gabion installation components are parts used for assembling, connecting, and fixing gabion structures. They ensure correct basket formation, geometric stability, and reliable connections throughout the system.
Technical Characteristics:
● C-rings / C-clips: Zn+Al coating or stainless steel.
● spirals: used mainly for welded gabions.
● steel connectors: wire diameter 4 mm.
● connector tensile strength: Rm ≥ 1770 MPa.
● lacing wire: used for connecting gabion panels, most commonly in woven gabions.
● spacers: for welded gabions, pre-manufactured to match specific basket dimensions.
Installation components are used for assembling woven and welded gabions, sectional baskets, panel systems, as well as for manual or pneumatic installation on site.| Read more…
Gabion installation components are parts used for assembling, connecting, and fixing gabion structures. They ensure correct basket formation, geometric stability, and reliable connections throughout the system.
Technical Characteristics:
● C-rings / C-clips: Zn+Al coating or stainless steel.
● spirals: used mainly for welded gabions.
● steel connectors: wire diameter 4 mm.
● connector tensile strength: Rm ≥ 1770 MPa.
● lacing wire: used for connecting gabion panels, most commonly in woven gabions.
● spacers: for welded gabions, pre-manufactured to match specific basket dimensions.
Installation components are used for assembling woven and welded gabions, sectional baskets, panel systems, as well as for manual or pneumatic installation on site.| Read more…
Geomaty przeciwerozyjne stosowane do ochrony skarp przed erozją powierzchniową oraz wspomagania rozwoju roślinności.
Charakterystyka techniczna:
● materiał: polipropylen;
● średnica włókien: około 0,65 mm;
● odporność na promieniowanie UV: stabilizowana;
● porowatość: >90%;
● nominalna grubość: 9–19 mm;
● dostawa: w rolkach;
● możliwość stosowania na skarpach o nachyleniu do około 65°.
Geomata przeciwerozyjna jest przestrzennym geosyntetykiem stosowanym do zabezpieczania skarp przed erozją powierzchniową oraz wspomagania tworzenia trwałej pokrywy roślinnej. | Więcej informacji…
Geowłókniny stosowane do separacji, filtracji, drenażu, ochrony i wzmacniania konstrukcji gruntowych. Rozwiązania dla infrastruktury drogowej, hydrotechnicznej i inwestycji komercyjnych.
Charakterystyka techniczna:
● materiał: polipropylen (PP) lub poliester (PET);
● technologia wykonania: igłowanie, termostabilizacja, tkanie;
● gramatura: dobierana zależnie od funkcji projektowej;
● funkcje: separacja, filtracja, drenaż, ochrona, wzmacnianie;
● odporność: zależna od rodzaju materiału i warunków eksploatacji;
● forma dostawy: rolki.
Geowłóknina jest geosyntetykiem wykorzystywanym do separacji warstw konstrukcyjnych, filtracji, drenażu, ochrony oraz wzmacniania podłoża. | Więcej informacji…
Geowłókniny stosowane do separacji, filtracji, drenażu, ochrony i wzmacniania konstrukcji gruntowych. Rozwiązania dla infrastruktury drogowej, hydrotechnicznej i inwestycji komercyjnych.
Charakterystyka techniczna:
● materiał: polipropylen (PP) lub poliester (PET);
● technologia wykonania: igłowanie, termostabilizacja, tkanie;
● gramatura: dobierana zależnie od funkcji projektowej;
● funkcje: separacja, filtracja, drenaż, ochrona, wzmacnianie;
● odporność: zależna od rodzaju materiału i warunków eksploatacji;
● forma dostawy: rolki.
Geowłóknina jest geosyntetykiem wykorzystywanym do separacji warstw konstrukcyjnych, filtracji, drenażu, ochrony oraz wzmacniania podłoża. | Więcej informacji…
Obrzeża trawnikowe do oddzielania nawierzchni, rabat i terenów zielonych. Elastyczne rozwiązania dla zagospodarowania przestrzeni, architektury krajobrazu i inwestycji komercyjnych.
Charakterystyka techniczna:
● materiał: tworzywa sztuczne odporne na warunki atmosferyczne;
● wysokość: zależnie od systemu;
● długość elementów: zależnie od modelu;
● kolorystyka: zgodna z ofertą producenta;
● sposób montażu: z wykorzystaniem kotew mocujących;
● możliwość formowania łuków i linii prostych
Obrzeża trawnikowe są elementami stosowanymi do oddzielania różnych rodzajów nawierzchni oraz kształtowania przestrzeni zielonych. | Więcej informacji…