Zapytanie o materiały, konsultację techniczną lub dobór rozwiązania? Skontaktuj się z nami.
Our engineering solutions
Culverts and Retention Tanks
Description
Culverts and retention tanks are systems used for drainage, water retention, and hydraulic engineering solutions. They may be manufactured from steel or polymer materials depending on project requirements.
Applications
These systems are used in road construction, technical infrastructure, drainage systems, and for storage of stormwater, technical water, and firefighting water. Depending on the task, they may be pipes, arch structures, or tank modules.
Key Selection Parameters
Important factors include diameter, wall thickness, material, protective coating type, joint configuration, tightness, execution form, and service conditions. For tanks, volume, module configuration, and sealing type are also important.
Technical Characteristics
- diameter: 500–3500 mm
- wall thickness: 2,0–6,0 mm
- material: steel / polymer
- coating: zinc, polymer, bitumen-polymer
- connection type: bolted with sealing
- execution: pipes, arches, tanks
Project-Specific Selection
Diameter, element thickness, protective coating type, joint configuration, sealing, and system form are selected according to loading, service environment, and structural scheme.
Parameters Table
| Parameter | Typical values |
|---|---|
| Diameter | 500–3500 mm |
| Wall thickness | 2,0–6,0 mm |
| Material | steel / polymer |
| Coating | zinc, polymer, bitumen-polymer |
| Connection type | bolted with sealing |
| Execution | pipes, arches, tanks |
| Supply format | standard or project-specific |
Project-Specific Selection
Diameter, element thickness, protective coating type, joint configuration, sealing, and system form are selected according to loading, service environment, and structural scheme.
Parameters Table
| Parameter | Typical values |
|---|---|
| Diameter | 500–3500 mm |
| Wall thickness | 2,0–6,0 mm |
| Material | steel / polymer |
| Coating | zinc, polymer, bitumen-polymer |
| Connection type | bolted with sealing |
| Execution | pipes, arches, tanks |
| Supply format | standard or project-specific |
Technical Notes
- Coating selection depends on environmental aggressiveness and required durability.
- For tanks, correct section configuration and joint tightness are important.
- Culvert system parameters are selected according to loading, backfill, and installation conditions.
Related Materials
- Geocells
- Parking Grids
- Ground Screws and Solar Carports
Skontaktuj się z naszym zespołem, aby uzyskać ofertę, dokumentację techniczną lub wsparcie przy realizacji projektu.
Skontaktuj się z nami
Materiały
- Gabiony i materace z siatki o podwójnym skręcie
- Gabiony zgrzewane, siatki i ogrodzenia
- Siatki pierścieniowe i heksagonalne do systemów ochronnych
- Geokrata komórkowa
- Przepusty i zbiorniki retencyjne
- Pale śrubowe i wiaty fotowoltaiczne
- Kratka parkingowa
- Elementy montażowe do gabionów
- Geomata przeciwerozyjna
- Geowłóknina
- Obrzeża trawnikowe
Kontakt
- Blosson Sp.z o.o., ul. Inflancka, 29, 61-132 Poznan, Poland
- office@geogabion.com
- +48 786 330 441
© 2026 Wszelkie prawa zastrzeżone. Stworzone przez Studio 3S
Regulamin | Polityka prywatności