Zapytanie o materiały, konsultację techniczną lub dobór rozwiązania? Skontaktuj się z nami.
Our engineering solutions
Parking Grids
Description
Parking grids are modular open-cell systems used for permeable surface construction, base stabilization, and load distribution. The grids can be filled with soil and grass or with mineral aggregate, allowing the surface to combine functional performance with a more natural appearance.
Applications
Parking grids are used for parking spaces, driveways, pedestrian paths, bicycle zones, technical access roads, residential areas, and other surfaces where permeability and surface stability are important. Selected grid types may also be used in more heavily loaded areas if the base structure is properly designed.
Key Selection Parameters
Important factors include module size, element height, cell type, fill material, permeability, biologically active area, load capacity, UV and temperature resistance, resistance to mechanical loading, module connection system, base type, and design load.
Technical Characteristics
- product type: modular parking / grass / road grid
- module size: approximately 39 cm – 58 cm
- element height: approximately 2.5–5.0 cm
- fill type: soil with grass / aggregate / mineral fill
- biologically active area: depending on the model, up to 88.6%
- permeability: high
- load capacity: depending on the system and base structure, up to 1000 t/m²
- installation: modular connection of elements
Project-Specific Selection
Module size, grid height, fill type, base layer thickness, drainage scheme, connection system, and permissible load are selected according to the intended use. For transport-loaded or special-use surfaces, not only the grid itself but also the properly designed base structure is critical.
Parameters Table
| Parameter | Typical values |
|---|---|
| Product type | modular parking / grass / road grid |
| Module size | approximately 39 cm – 58 cm |
| Element height | approximately 2.5–5.0 cm |
| Cell type | depending on the model |
| Fill type | grass / aggregate / mineral fill |
| Biologically active area | depending on the model, up to 88.6% |
| Permeability | high, with water infiltration into the base |
| Permissible load | depending on the system and base structure, up to 1000 t/m² |
| Resistance | weather, mechanical loads, and UV |
| Installation | modular connection of elements |
Project-Specific Selection
Module size, grid height, fill type, base layer thickness, drainage scheme, connection system, and permissible load are selected according to the intended use. For transport-loaded or special-use surfaces, not only the grid itself but also the properly designed base structure is critical.
Parameters Table
| Parameter | Typical values |
|---|---|
| Product type | modular parking / grass / road grid |
| Module size | approximately 39 cm – 58 cm |
| Element height | approximately 2.5–5.0 cm |
| Cell type | depending on the model |
| Fill type | grass / aggregate / mineral fill |
| Biologically active area | depending on the model, up to 88.6% |
| Permeability | high, with water infiltration into the base |
| Permissible load | depending on the system and base structure, up to 1000 t/m² |
| Resistance | weather, mechanical loads, and UV |
| Installation | modular connection of elements |
Technical Notes
- For loaded surfaces, the properly designed base is just as important as the grid itself.
- The grid may be used with both grass-filled and mineral-filled surfaces.
- High permeability and a large proportion of biologically active area are among the key advantages of this solution.
- Different zones — pedestrian, parking, access, or technical — require appropriate grid selection in terms of format, height, and load capacity.
Related Materials
- Geocells
- Culverts and Retention Tanks
- Ground Screws and Solar Carports
Skontaktuj się z naszym zespołem, aby uzyskać ofertę, dokumentację techniczną lub wsparcie przy realizacji projektu.
Skontaktuj się z nami
Materiały
- Gabiony i materace z siatki o podwójnym skręcie
- Gabiony zgrzewane, siatki i ogrodzenia
- Siatki pierścieniowe i heksagonalne do systemów ochronnych
- Geokrata komórkowa
- Przepusty i zbiorniki retencyjne
- Pale śrubowe i wiaty fotowoltaiczne
- Kratka parkingowa
- Elementy montażowe do gabionów
- Geomata przeciwerozyjna
- Geowłóknina
- Obrzeża trawnikowe
Kontakt
- Blosson Sp.z o.o., ul. Inflancka, 29, 61-132 Poznan, Poland
- office@geogabion.com
- +48 786 330 441
© 2026 Wszelkie prawa zastrzeżone. Stworzone przez Studio 3S
Regulamin | Polityka prywatności